LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Automatic Transmission External Controls - (Hybrid)) >> Removal And Installation >> Selector Lever Button >> Removal

Selector Lever Button: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the loose selector lever button by carefully prying the button out with a screwdriver.
    Fig 1: Removing Loose Selector Lever Button
    G03901643Courtesy of FORD MOTOR CO.