LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Automatic Transmission External Controls - (Hybrid)) >> Removal And Installation >> Selector Lever Button >> Installation

Selector Lever Button: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install a new selector lever button by pressing the button into the selector lever until it clicks into place.
    Fig 1: Installing New Selector Lever Button
    G03901643Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals