General Specifications
WARNING: This page is about a different variant/trim than selected.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Flywheel runout | |
| Maximum runout mm (in) | 0.200 (0.008) |
| Clutch disc | |
| Minimum allowable depth to rivet head mm (in) | 0.3 (0.012) |
| Maximum runout mm (in) | 0.7 (0.027) |
| Clutch pressure plate | |
| Maximum runout mm (in) | 0.5 (0.02) |
| Pressure plate diaphragm spring fingers | |
| Maximum depth mm (in) | 0.5 (0.020) |
| Maximum clearance mm (in) | 0.5 (0.020) |
| Clutch pedal free play mm (in) | 5.0-13.0 (0.20-0.51) |
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1 (Canada CPM-1) | ESA-M6C25-A |