Differential Seals - LH: Removal

WARNING: This page is about a different variant/trim than selected.

With the vehicle in DRIVE, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
Turn the ignition to the OFF position.
Remove the retainers and remove the LH splash shield.

Fig 1: Locating Retainers For LH Splash Shield
Courtesy of FORD MOTOR CO.
Remove the drain plug and drain the fluid.

Fig 2: Removing Drain Plug And Drain Fluid
Courtesy of FORD MOTOR CO.
Remove the LH halfshaft.
Using the special tools, remove and discard the LH differential seal.

Fig 3: Removing And Discard LH Differential Seal
Courtesy of FORD MOTOR CO.