Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Camshaft position (CMP) sensor bolt | 20 | 15 | - |
| Crankshaft position (CKP) sensor bolts | 7 | - | 62 |
| Cylinder head temperature (CHT) sensor | 12 | 9 | - |
| Fuel rail pressure and temperature sensor bolts | 5 | - | 44 |
| Heated oxygen sensors (H02S) and catalyst monitor sensors | 48 | 35 | - |
| Idle air control (IAC) valve bolts | 4 | - | 35 |
| Knock sensor (KS) bolt | 20 | 15 | - |
| Mass air flow (MAF) sensor screws | 10 | - | 89 |
| Powertrain control module (PCM)-to-dash stud bolts | 6 | - | 53 |
| Throttle position (TP) sensor screws | 10 | - | 89 |