LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Electronic Engine Control System - 2.3L - (Except Hybrid)) >> Removal And Installation >> Camshaft Position (CMP) Sensor >> Material

Camshaft Position (CMP) Sensor: Material

WARNING: This page is about a different variant/trim than selected.
CAMSHAFT POSITION SENSOR MATERIAL SPECIFICATION

Item Specification
SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (in Canada Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12) or equivalent WSS-M2C930-A
Fig 1: Locating Camshaft Position Sensor With Torque Specifications
G03900475Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals