LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Hydraulic Brake System Actuation -- F250-F550 Super Duty) >> Removal And Installation >> Brake Master Cylinder >> Removal And Installation >> Vehicles with Hydro-Boost®

Vehicles with Hydro-Boost®

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the power steering tube bracket nuts and position the bracket aside.
    • To install, tighten to 27 Nm (20 lb-ft).
  2. Remove the brake master cylinder.
scientia non olet · About LEMON Manuals