LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 860 (Rear Suspension -- F250-F550 Super Duty) >> Removal And Installation >> Stabilizer Bar and Link >> Removal And Installation >> F-250 and all other F-350 vehicles

F-250 and all other F-350 vehicles

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the stabilizer bar bracket nuts, U-bolts, brackets and the stabilizer bar.
    • Discard the nuts and U-bolts.
    • To install, tighten to 40 Nm (30 lb-ft).
scientia non olet · About LEMON Manuals