Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Remove the two lower headlamp bezel screws.

Fig 1: Removing Lower Headlamp Bezel Screws
Courtesy of FORD MOTOR CO.
Remove the headlamp bezel.
- Remove the two top headlamp bezel screws and release the locking tab.
- Disconnect the electrical connectors.
  
  Fig 2: Removing Headlamp Bezel
  Courtesy of FORD MOTOR CO.
Remove the headlamp.
1. Remove the headlamp retaining ring screws.
2. Remove the headlamp retaining ring.
3. Position the headlamp so the electrical connector can be accessed.
4. Disconnect the electrical connector.
  
  Fig 3: Disconnecting Electrical Connector
  Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.