Crankshaft Front Seal: Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Clean all sealing surfaces with metal surface prep.

1.
Apply clean engine oil to the seal lip and seal bore before installing the seal.

2.

Using the special tools, install a new crankshaft front seal.

GFD15550

Courtesy of FORD MOTOR COMPANY

3.

Install the crankshaft pulley. For additional information, refer to Crankshaft Pulley .