LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1622 (Parking Brake System - Parking Brake & Actuation) >> Removal And Installation >> Parking Brake Warning Indicator Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the floor console. For additional information, refer to INSTRUMENT PANEL & CONSOLE -- FUSION, MILAN & MKZ article.
  2. Disconnect the parking brake warning indicator switch electrical connector.
  3. Remove the parking brake warning indicator switch screw.
  4. Remove the parking brake warning indicator switch.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals