LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1613 (Information Center - Instrumentation, Message Center And Warning Chimes) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Principles of Operation >> Warning Chimes >> Safety Belt Warning Chime

Safety Belt Warning Chime

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The safety belt warning chime warns that the safety belt is not fastened. The safety belt warning chime sounds for 6 seconds when the driver safety belt is not fastened and the ignition switch is transitioned from the OFF or ACC position to the ON or START position.

The safety belt warning chime stops sounding when the safety belt is fastened, when the ignition is switched from the ON or START position to the OFF or ACC position, or when the chime has sounded for approximately 6 seconds.

The safety belt warning chime inputs are: