LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1511 (Seat System - Seats) >> Removal And Installation >> Heated Seat Module - Front Seat >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the RH front door trim panel. For additional information, refer to Front Door Trim Panel removal and installation in INTERIOR TRIM AND ORNAMENTATION article.
  2. Disconnect the heated seat module electrical connector.
  3. Remove the heated seat module retainer.
  4. Rotate the bottom of the heated seat module upward and remove.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals