LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1504 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Luggage Compartment Lid Latch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the luggage compartment lid latch electrical connector.
  2. Remove the 3 luggage compartment lid latch bolts.
    • To install, tighten to 9 Nm (80 lb-in).
  3. Disconnect the lock cylinder cable and remove the luggage compartment lid latch.
  4. To install, reverse the removal procedure.