LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1416 (Parking Brake System - Parking Brake & Actuation) >> Diagnosis And Testing >> Parking Brake >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect the following mechanical and electrical components:
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Brake shoes and hardware
    • Parking brake cables and conduits
    • Parking brake control
    • Parking brake control release handle
    • Wiring, terminals or connectors
    • Parking brake switch
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the cause is not visually evident, verify the symptom and GO to SYMPTOM CHART .