LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1408 (Exterior Lighting System) >> Diagnosis And Testing >> Headlamps >> Pinpoint Tests >> Pinpoint Test C: One High Beam Headlamp Is Inoperative >> Pinpoint Test C: One High Beam Headlamp Is Inoperative

Pinpoint Test C: One High Beam Headlamp Is Inoperative

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Use the correct probe adapter(s) when making measurements. Failure to use the correct probe adapter(s) may damage the connector.
  1. C1 CHECK THE LOW BEAM OPERATION 
    • Check the operation of the low beams.
    • Do the low beams operate correctly? 
    • Yes:  REPAIR circuit CLF08 (YE/VT) for an open. TEST the system for normal operation.
    • No:  GO to PINPOINT TEST B .
scientia non olet · About LEMON Manuals