Engagement Concerns: No Forward and/or No Reverse

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

DIAGNOSTIC ROUTINES REFERENCE - ENGAGEMENT CONCERNS NO FORWARD AND NO REVERSE

Possible Component	Reference/Action
207 - ROUTINE
No Forward, No Reverse, No Forward or Reverse	-
Selector lever linkage damaged or out of position	Using a scan tool, check selector lever position. Refer to SELECTOR LEVER CABLE ADJUSTMENT -- AISIN AW21 .
Incorrect neutral switch position	Carry out neutral position learning. Refer to NEUTRAL POSITION LEARNING .
-	Disconnect the Transmission Control Module (TCM) electrical connector. If concern still exists, this indicates an internal mechanical problem. Connect the TCM and carry out pressure checks.
-	If concern is resolved by disconnecting the TCM , this indicates an electrical concern. Install a new TCM . Refer to Installation . Check wiring harness (external and internal) valve body connections. Inspect for damaged or broken halfshafts. Refer to FRONT DRIVE HALFSHAFTS .
Halfshafts broken