LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1183 (Interior Trim And Ornamentation) >> Removal And Installation >> Engine Cover >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the console. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
  2. Remove the instrument panel steering column cover.
    3. Fig 1: Instrument Panel Steering Column Cover
    GF0011260Courtesy of FORD MOTOR CO.
  3. Remove the engine cover.
    • Unfasten the engine cover latches.
    • Lift the engine cover upward from the floor and remove from the vehicle.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals