LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 3.0L (4V) >> In-Vehicle Repair >> Crankshaft Rear Seal >> Installation

Crankshaft Rear Seal: Installation

    NOTE: Clean all sealing surfaces with metal surface cleaner.
    NOTE: Apply clean engine oil to the seal lip and seal bore before installing the seal.
    Fig 1: Installing Crankshaft Front Seal
    G03898287Courtesy of FORD MOTOR CO.
  1. Using the special tools, install a new crankshaft front seal.
scientia non olet · About LEMON Manuals