LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Cluster And Panel Illumination >> Removal And Installation >> Instrument Cluster Bulb >> Removal and Installation

Removal and Installation

  1. Remove the instrument cluster. For additional information, refer to INSTRUMENT CLUSTER .
    2. NOTE: To remove the illumination bulb, rotate the bulb one quarter turn counterclockwise and lift it straight out from the instrument cluster.
    Fig 1: Locating Instrument Cluster Bulbs
    G03902545Courtesy of FORD MOTOR CO.
  2. Remove the illumination bulb(s) in question.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals