LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Drum Brake System >> Removal And Installation >> Brake Drum >> Installation

Brake Drum: Installation

  1. Using the special tool, measure the inside diameter of the brake drum.
    • Install a new brake drum if the inside diameter exceeds the specification stamped on the outside face of the brake drum.
      Fig 1: Measuring Inside Diameter Of Brake Drum
      G03897472Courtesy of FORD MOTOR CO.
  2. Adjust the rear brakes, refer to BRAKE SHOE ADJUSTMENT .
  3. Position the brake drum on the vehicle.
scientia non olet · About LEMON Manuals