LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body Panel System - Front End Body Panels >> Removal And Installation >> Cowl Panel Grille >> Removal and Installation

Removal and Installation

  1. Remove the 2 wiper pivot arms nuts.
    • To install, tighten to 35 Nm (26 lb-ft).
  2. Remove the LH and RH wiper pivot arms.
  3. Remove the 8 cowl panel grille pin-type retainers.
  4. Remove the 8 cowl panel grille caps and screws.
  5. Remove the LH cowl panel grille.
  6. Remove the RH cowl panel grille.
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals