LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Parking Aid System >> Diagnosis And Testing >> Parking Aid >> Pinpoint Test H: DTC C1920 and B2373 LED No. 1 Circuit Failure >> Normal Operation

Normal Operation

The parking aid system is enabled when the vehicle ignition is in RUN and the transmission is in REVERSE. The system can be disabled by the parking aid disable switch. The parking aid module sends a signal to the LED over circuit 1436 (VT/OG) when the switch is pressed. The switch is grounded through circuit 57 (BK).