Torque Converter

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

A new or remanufactured torque converter must be installed if one or more of the following statements are true:
- A torque converter malfunction has been determined based on the complete diagnostic procedures.
- Converter stud(s), impeller hub or bushing is damaged.
- Discoloration of the torque converter (due to overheating).
- Evidence of transmission assembly or fluid contamination due to the following transmission or converter failure modes:
  - Major metallic failure
  - Multiple clutches or clutch plate failures
  - Sufficient component wear which results in metallic contamination

Fig 1: Cut-Away View Of Torque Converter

Courtesy of FORD MOTOR CO.