|
|
- Caliper mounting bolts loose.
|
|
- Damaged or worn caliper pins or retainers.
|
- CHECK the caliper pins and retainers for lubrication and correct fit. LUBRICATE or INSTALL new components as necessary.
|
- Missing or damaged antirattle clips or SPRINGS.
|
- CHECK the brake pads for missing clips or broken springs. INSTALL new components as necessary. REFER to DISC
.
|
|
|
|
- Clicking noise - with brakes applied with ABS brakes
|
- ABS hydraulic control unit.
|
|
- Squealing noise-occurs on first (morning) brake application
|
|
- Acceptable condition. Caused by humidity and low disc brake pad temperature.
|
- Squealing noise-a continuous squeal
|
- Disc brake pads or linings worn below minimum thickness.
|
- INSTALL new disc brake pads. REFER to DISC
.
|
- Squealing noise-an intermittent squeal brought on by cold, heat, water, mud or snow
|
|
|
- Groaning noise-occurs at low speeds with brake lightly applied (creeping)
|
|
|
- Grinding noise-continuous
|
- Disc brake pads or linings worn below minimum thickness.
|
- INSPECT the disc brake pads, brake discs and attaching hardware for damage. REPAIR or INSTALL new components as necessary. REFER to DISC
.
|
|
|
- Brake linings contaminated with grease or oil.
|
- INSPECT the brake pads and shoes for contamination. REPAIR or INSTALL new components as necessary. REFER to DISC
.
|
- Brake vibration/shudder-occurs when brakes are applied
|
- Uneven disc or drum wear.
- Uneven disc brake pad or lining transfer.
- Suspension components.
|
|
- Brake vibration/shudder-occurs when the brake pedal is released
|
|
- INSPECT the disc brake pads or linings for premature wear. REPAIR or INSTALL a new caliper or wheel cylinder as necessary. REFER to DISC
.
|