P1385 - Variable Camshaft Timing Solenoid A Circuit Malfunction (Bank 2)
P1385 - VARIABLE CAMSHAFT TIMING SOLENOID A CIRCUIT MALFUNCTION (BANK 2)
| Description: | The comprehensive component monitor (CCM) monitors the VCT circuit to the PCM for high and low voltage. If the voltage falls below a calibrated limit a calibrated amount of time during testing, the test fails. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | DTC P1380 is a VCT circuit check. Testing should include wires, solenoid coil, and the PCM. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to HK: Variable Cam Timing (VCT) STEP 1 | ||