Camshaft Bearing: Specifications
Bearing caps bolts:
Stage 1: Tighten the camshaft bearing caps one turn at a time until tight.
Stage 2: Tighten the bolts to 7 Nm (62 inch lbs.)
Stage 3: Tighten the bolts to 16 Nm (12 ft. lbs.)
Bearing caps bolts:
Stage 1: Tighten the camshaft bearing caps one turn at a time until tight.
Stage 2: Tighten the bolts to 7 Nm (62 inch lbs.)
Stage 3: Tighten the bolts to 16 Nm (12 ft. lbs.)