- No communication with the parking aid module
|
- Circuitry.
- Central junction box (CJB) fuse 26 (7.5A).
- Parking aid module.
|
|
- Parking aid is inoperative
|
- Circuitry.
- Parking aid sensor.
- Parking aid speaker.
- Parking aid disable switch.
- Parking aid module.
|
|
- Continuous or intermittent tone when no obstacles or fault codes are present (certain obstacles may appear "stealthy" to the system, depending on geometric shape, size and material.)
|
- Dirty or iced-over parking aid sensor(s).
|
- CLEAN the rear bumper and sensors with high-pressure water.
|
- Parking aid sensor bezel(s) or parking aid sensor(s) locked into the rear bumper incorrectly.
|
- INSTALL the parking aid sensor bezel(s) into the rear bumper correctly. INSTALL the parking aid sensor(s) into the parking aid sensor bezel(s) correctly.
|
- Parking aid sensors are not aligned correctly.
|
|