LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, RWD >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs & Bearings - Full Floating Axle - Ford -- Excursion & F250-F350 Super Duty >> Removal And Installation >> Axle Shaft >> Installation

Axle Shaft: Installation

NOTE: Lubricate the O-ring seal with lubricant prior to installation of axle shaft.
  1. Install the axle shaft.
    Fig 1: Installing Axle Shaft
    G02769555Courtesy of FORD MOTOR CO.
    2. NOTE: Coat the threads of the retaining bolts with stud and bearing mount.
    Fig 2: Installing Axle Shaft Retaining Bolts
    G02769556Courtesy of FORD MOTOR CO.
  2. Install the retaining bolts and tighten.
scientia non olet · About LEMON Manuals