LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, RWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Fuel Delivery >> Fuel System - General Information - Gasoline & Diesel - Excursion & F250-F550 Super Duty >> General Procedures >> Vapor Tube Fittings >> Disconnect

Vapor Tube Fittings: Disconnect

WARNING: The evaporative emission system contains fuel vapor and condensed fuel vapor. Although not present in large quantities, it still presents the danger of explosion or fire. Disconnect the battery ground cable from the battery to minimize the possibility of an electrical spark occurring, possibly causing a fire or explosion if fuel vapor or fuel liquid is present in the area.
  1. Disconnect the vapor tube from the fitting. Remove by compressing the tabs of the clamp together and disconnecting the tube.
    Fig 1: Disconnecting Vapor Tube From Fitting
    G02776985Courtesy of FORD MOTOR CO.