Camshaft End Play

Special Tool(s) 

Fig 1: Identifying Special Tool(s)

Courtesy of FORD MOTOR CO.

1. Use a Dial Indicator Gauge with Holding Fixture to measure camshaft end play.
2. Position the camshaft to the rear of the cylinder head.
3. Zero the indicator.
4. Move the camshaft to the front of the cylinder head. Note and record the camshaft end play.
   • If camshaft end play exceeds specifications, install new camshaft and recheck end play.
   • If camshaft end play exceeds specification after camshaft installation, install a new cylinder head.
     Fig 2: Measuring Camshaft End Play Using Special Tool

     Courtesy of FORD MOTOR CO.