LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, RWD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 6.8L - Excursion & F250-F550 Super Duty >> In-Vehicle Repair >> Crankshaft Pulley >> Removal

Crankshaft Pulley: Removal

  1. Remove the engine cooling fan and fan shroud. Refer to ENGINE COOLING .
  2. Remove the drive belt.
  3. Raise the vehicle on a hoist. Refer to JACKING & LIFTING .
  4. Remove the crankshaft pulley bolt.
  5. Using the special tool, remove the crankshaft pulley.
    Fig 1: Removing Crankshaft Pulley
    G02771250Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals