Removal and Installation

Remove the radiator assembly. Refer to RADIATOR - 6.0L DIESEL .
Disconnect the cooling fan clutch electrical connector. Unclip and position the fan wiring aside.

Fig 1: Disconnecting Cooling Fan Clutch Electrical Connector
Courtesy of FORD MOTOR CO.

NOTE: Use a hole in the fan hub to prevent the fan from turning.

Fig 2: Removing Cooling Fan And Clutch

Courtesy of FORD MOTOR CO.

Using the special tool, remove the cooling fan and clutch.
Remove the cooling fan and clutch assembly.
If necessary, remove the bolts and separate the cooling fan and the clutch.

Fig 3: Removing Cooling Fan And Clutch Assembly
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.