LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, RWD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Auxiliary Emission Control Systems >> Engine Emission Control System - Excursion & F250-F550 Super Duty >> Removal And Installation >> Exhaust Manifold to Exhaust Gas Recirculation (EGR) Valve Tube - 5.4L (2V) >> Removal and Installation

Removal and Installation

  1. Remove the air cleaner outlet tube. Refer to INTAKE AIR DISTRIBUTION & FILTERING .
  2. Remove the exhaust gas recirculation (EGR) valve-to-exhaust manifold tube.
    1. Remove the two differential pressure feedback EGR sensor hoses.
    2. Disconnect the EGR valve tube fittings.
      Fig 1: Disconnecting EGR Valve Tube Fittings
      G02773346Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals