LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, RWD >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panel & Console -- Excursion & F250-F550 Super Duty >> Removal And Installation >> Instrument Panel - Cluster Finish Panel >> Removal and Installation

Removal and Installation

  1. Remove the audio unit. Refer to AUDIO UNIT .
  2. Remove the instrument panel cluster finish panel.
    1. Loosen the screws.
    2. Remove the instrument panel cluster finish panel.
      • Disconnect the electrical connectors.
        Fig 1: Disconnecting Electrical Connectors
        G02774323Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
    Fig 2: Installing Electrical Connectors
    G02774324Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals