Removal and Installation

All vehicles 

1. Open the floor console cover.
   Fig 1: Opening Floor Console Cover

   Courtesy of FORD MOTOR CO.
2. Remove the storage compartment.
   Fig 2: Removing Storage Compartment

   Courtesy of FORD MOTOR CO.
3. Remove the console tray mat.

   Vehicles not equipped with the rear video entertainment system 

4. Remove the bolts and the floor console.
   • If equipped, disconnect the electrical connector.
     Fig 3: Disconnecting Electrical Connector

     Courtesy of FORD MOTOR CO.

   Vehicles equipped with the rear video entertainment system 

5. Remove the floor console bolts.
   Fig 4: Removing Floor Console Bolts

   Courtesy of FORD MOTOR CO.
6. Remove the floor console.
   • Slide the console rearwards to disengage it from the hold down bracket.
   • Lift the console to access and disconnect the electrical connectors.
     Fig 5: View Of Floor Console

     Courtesy of FORD MOTOR CO.

   All vehicles 

7. To install, reverse the removal procedure.