Differential Check - Tractech® Truetrac® (Dana)
- Shift the transmission into NEUTRAL.
- Raise and support the vehicle. Refer to
JACKING & LIFTING
.
- Spin either rear wheel.
- Shift the transmission into gear.
- Spin either rear wheel.
- The other wheel must spin with a fluid motion in the opposite direction and at the same speed of the wheel being spun. Any feeling of gripping and release/roughness indicates that further inspection of the axle assembly is necessary. For additional information about axle disassembly and inspection, refer to
REAR DRIVE AXLE/DIFFERENTIAL - DANA 80
or
REAR DRIVE AXLE/DIFFERENTIAL - DANA S135
.