Removal and Installation

NOTE: The roof opening panel must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the roof opening panel has been removed from the roof opening panel assembly, a new roof opening panel motor/module has been installed, or when a new roof opening panel assembly has been installed. Refer to ROOF OPENING PANEL MOTOR INITIALIZATION .

Remove the roof opening panel. Refer to ROOF OPENING PANEL .
Remove the water trough.
1. Remove the bolts.
2. Remove the water trough.
  
  Fig 1: Removing Water Trough
  Courtesy of FORD MOTOR CO.
Flex the opening shield to remove the guides from the tracks and remove the roof opening panel shield.

Fig 2: Removing Roof Opening Panel Shield
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.