Removal and Installation

NOTE: RH side shown, LH is similar.

Fig 1: Removing Two Air Deflector Tether Screws

Courtesy of FORD MOTOR CO.

Remove the two air deflector tether screws.
Raise the front of the air deflector.

Fig 2: Raising Front Of Air Deflector
Courtesy of FORD MOTOR CO.
Slide the air deflector toward the rear, then lift up to release it from the pivot shafts.

Fig 3: Lifting Up Air Deflector To Release From Pivot Shafts
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure