Removal and Installation

Remove the seat. Refer to FRONT SEAT - CAPTAIN'S CHAIR AND 40 PERCENT .
Remove the safety belt buckle nut and disconnect the usage detection switch electrical connector, and remove safety belt buckle.
Remove the bolts.

Fig 1: Removing Safety Belt Buckle Nut
Courtesy of FORD MOTOR CO.
Disconnect the electrical connector.

Fig 2: Disconnecting Electrical Connector
Courtesy of FORD MOTOR CO.
Remove the electrical harness pin-type retainer.

Fig 3: Removing Electrical Harness Pin-Type Retainer
Courtesy of FORD MOTOR CO.
Disconnect the seat motor electrical connector.

Fig 4: Disconnecting Seat Motor Electrical Connector
Courtesy of FORD MOTOR CO.
Remove the seat track.
To install, reverse the removal procedure.