LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seat System -- Excursion & F250-F550 Super Duty >> Removal And Installation >> Rear Seat - Bench, Crew Cab >> Removal and Installation

Removal and Installation

    NOTE: Removing the rear seat requires more than one technician.
    Fig 1: Removing Retainers Of Rear Seat
    G02773781Courtesy of FORD MOTOR CO.
  1. Remove the retainers and the rear seat.
    2. NOTE: When installing the seat, tighten the two front mounting bolts, then the rear two mounting nuts.
  2. To install, reverse the removal procedure.
  3. Check the active restraint system for correct operation.
    • Make sure the safety belt is not twisted prior to installation.
scientia non olet · About LEMON Manuals