LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seat System -- Excursion & F250-F550 Super Duty >> Disassembly And Assembly >> Rear Seat Cushion - SuperCab >> Disassembly and Assembly

Disassembly and Assembly

    NOTE: The 60 percent seat is shown. The 40 percent seat is similar.
  1. Remove the seat. Refer to REAR SEAT - SUPERCAB .
  2. Remove the latch. Refer to SEAT LATCH - SUPERCAB, REAR .
  3. Unclip the J-clip.
    Fig 1: Uncliping J-Clip
    G02774070Courtesy of FORD MOTOR CO.
  4. Remove the upholstery.
    Fig 2: Removing Upholstery
    G02774071Courtesy of FORD MOTOR CO.
  5. Remove the seat cushion foam pad from the frame.
  6. To assemble, reverse the disassembly procedure.