Disassembly and Assembly

Remove the rear seat quad bucket backrest. Refer to REAR SEAT BACKREST - CREW CAB, QUAD BUCKET .
Release the J-clips.

Fig 1: Releasing J-Clips
Courtesy of FORD MOTOR CO.
Remove the two pin-type retainers.

Fig 2: Removing Pin-Type Retainers
Courtesy of FORD MOTOR CO.
Remove the seat cushion pan from the cushion trim cover and foam pad assembly.

Fig 3: Removing Seat Cushion Pan From Cushion Trim Cover
Courtesy of FORD MOTOR CO.
Invert the seat cushion trim cover and remove all the hog rings and remove the trim cover from the cushion foam pad.

Fig 4: Removing Trim Cover From Cushion Foam Pad
Courtesy of FORD MOTOR CO.
To assemble, reverse the disassembly procedure.