Disassembly and Assembly

NOTE: The 60 percent seat is shown, 40 percent seat similar.

Remove the 60 percent or 40 percent cushion. Refer to REAR SEAT CUSHION - 60/40, CREW CAB .
Using a suitable tool, remove the grocery bag hooks (if equipped).

Fig 1: Removing Grocery Bag Hooks
Courtesy of FORD MOTOR CO.
Release the J-clip.

Fig 2: Releasing J-Clip
Courtesy of FORD MOTOR CO.
Release the two side hook-and-loop strips (one shown).

Fig 3: Releasing Side Hook-And-Loop Strips
Courtesy of FORD MOTOR CO.

CAUTION: Use care when separating the seat cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the seat cushion foam.

Fig 4: Releasing Hook-And-Loop Strips

Courtesy of FORD MOTOR CO.

Invert the seat cushion trim cover and release the hook-and-loop strips.
Remove the hog rings.

Fig 5: Removing Hog Rings
Courtesy of FORD MOTOR CO.
Remove the cushion trim cover from the foam pad.
Remove the foam pad from the seat cushion frame.

Fig 6: Removing Foam Pad From Seat Cushion Frame
Courtesy of FORD MOTOR CO.
To assemble, reverse the disassembly procedure.