Safety Belt Warning Chime

The safety belt warning chime warns that the safety belt is not fastened. The safety belt warning chime will sound when the driver safety belt is not fastened and the ignition switch is turned to RUN or START.

The safety belt warning chime will stop sounding when:

• the safety belt is fastened.
• the ignition switch is switched to the OFF/LOCK or ACC position.
• the chime has sounded for 6 seconds.

The safety belt warning chime inputs are:

• ignition switch START position (clutch pedal pressed)
• ignition switch RUN position
• driver safety belt switch

Output is the instrument cluster chime.