LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes - Excursion, F250-F550 Super Duty >> Torque Specifications >> Excursion

Torque Specifications: Excursion

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Axle Shaft-To-Hub Bolts 99 (134)
Brake Booster Mounting Nuts (Vacuum) 18 (24)
Brake Pedal Bracket Bolt/Nuts 18 (24)
Brake Pressure Switch 13 (18)
Front Caliper Anchor Plate Bolts 166 (225)
Front Caliper Bleeder Screw 18 (24)
Front Caliper Bolts 42 (57)
Front Caliper Hose Bolt 26 (35)
Front Wheel Hub Extender Nuts 130 (176)
Master Cylinder Brake Line Fittings 18 (24)
Master Cylinder Nuts 20 (27)
Parking Brake Control Retaining Nuts 19 (26)
Parking Brake Release Handle Nuts 28-37 (38-50)
Power steering tube bracket nuts 13 (18)
Power Steering Hose-To-Hydro Boost Fittings (High Pressure) 26 (35)
Power Steering Hose-To-Hydro Boost Fittings (Low Pressure) 16 (22)
Rear Caliper Adapter 150 (203)
Rear Caliper Bolts (1) 27 (37)
Rear Caliper Hose Bolt 37 (50)
Rear Hub Nut (2) 70 (95)
Rotor-To-Rear Hub Bolts 66-88 (89-119)
Spindle Nut (Front 2WD) (3)
Wheel Lug Nuts (8-Lug M-14 Wheel Bolts) 165 (224)
INCH Lbs. (N.m) 
Front Disc Shield Bolts 97 (11)
Parking Brake Release Handle Nuts 72-97 (8-11)
Rear Wheel Disc Brake Shield Bolts 97 (11)
Vacuum Pump Bolts 80-106 (9-12)
(1) With Ford and Dana axles.
(2) Back off 90 degrees, then retighten 18 Ft. Lbs. (24 N.m).
(3) Tighten spindle nut while rotating rotor. Loosen 2 turns. Tighten spindle nut to 17-24 Ft. Lbs. (23-33 N.m) while rotating rotor. Loosen spindle nut 175 degrees. Tighten spindle nut to 17 INCH Lbs. (2 N.m) while rotating rotor.