LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, 4WD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Fuel Delivery >> Fuel System - General Information - Gasoline & Diesel - Excursion & F250-F550 Super Duty >> General Procedures >> Vapor Tube Fittings >> Connect

Vapor Tube Fittings: Connect

  1. Inspect the fitting and the tube for damage.
    Fig 1: Inspecting Fitting And Tube For Damage
    G02776986Courtesy of FORD MOTOR CO.
  2. Remove any dirt or obstructions.
  3. Compress the tabs on the clamp and install the vapor tube on the fitting.
scientia non olet · About LEMON Manuals