LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, 4WD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 6.8L - Excursion & F250-F550 Super Duty >> In-Vehicle Repair >> Crankshaft Rear Seal with Retainer Plate >> Removal

Crankshaft Rear Seal with Retainer Plate: Removal

  1. Remove the flexplate. Refer to FLEXPLATE .
  2. Using the special tools, remove the crankshaft rear oil slinger.
    Fig 1: Removing Crankshaft Rear Oil Slinger Using Special Tools
    G02771469Courtesy of FORD MOTOR CO.
  3. Using the special tools, remove the crankshaft rear seal.
    Fig 2: Removing Crankshaft Rear Seal Using Special Tools
    G02771470Courtesy of FORD MOTOR CO.
  4. Remove the oil pan. Refer to OIL PAN - AUTOMATED EQUIPMENT  or OIL PAN - MANUAL TRANSMISSION .
  5. Remove the bolts and the crankshaft rear seal retainer plate.
    Fig 3: Removing Bolts And Crankshaft Rear Seal Retainer Plate
    G02771471Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals