LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, 4WD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 6.8L - Excursion & F250-F550 Super Duty >> In-Vehicle Repair >> Crankshaft Front Seal >> Removal

Crankshaft Front Seal: Removal

  1. Remove the crankshaft pulley. Refer to CRANKSHAFT PULLEY .
  2. Using the special tool, remove the crankshaft front seal.
    Fig 1: Removing Crankshaft Front Seal
    G02771255Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals