LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, 4WD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 6.8L - Excursion & F250-F550 Super Duty >> In-Vehicle Repair >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

  1. Lubricate the engine front cover and the crankshaft front seal inner lip with clean engine oil.
    Fig 1: Lubricating Engine Front Cover And Crankshaft Front Seal Inner Lip
    G02771256Courtesy of FORD MOTOR CO.
  2. Using the special tools, install the crankshaft front seal into the engine front cover.
    Fig 2: Installing Crankshaft Front Seal Into Engine Front Cover
    G02771257Courtesy of FORD MOTOR CO.
  3. Install the crankshaft pulley. Refer to CRANKSHAFT PULLEY .
scientia non olet · About LEMON Manuals